Setting up the MTU VLAN switch


Setting up the switch is easy. Go to the web page of the switch, and set up the display as given in the next picture.


This results is port 1 being the uplink port, making two port VLANs with the other ports. So we have 7 VLAN's. VLAN p1-p3 is used for the high data rate  multicast streams from the RYZEN to the data processing NUC's, and VLAN p1-p8 is used for internet access.  That's all there is to do for the VLAN configuration.

An extra TL-SG105 switch, connected to p1, streams the multicast streams to the two NUC’s.


next page: PC for radiod